Virtual Commissioning of a Production Line

In this module, virtual commissioning is applied on the Lucas Nülle Industrial Mechatronic System (IMS) assembly line.

Contents:

• 1. Learning Outcome
  • 1.1. Introduction
  • 1.2. Requirements
  • 1.3. What you need
• 2. Task
• 3. Preparation: Station IMS3
  • 3.1. Goal
  • 3.2. Task
• 4. Station IMS3: Practical Assignment
  • 4.1. Goal
  • 4.2. IMS3 Station Functionality
  • 4.3. The Virtual Layer - Mechatronics Concept Designer
  • 4.4. The Physical Layer – PLC Program
  • 4.5. Controlling the MCD Application using the PLC Program
• 5. Preparation: Station IMS4
  • 5.1. Goal
  • 5.2. Task
• 6. Station IMS4: Practical Assignment
  • 6.1. Goal
  • 6.2. IMS4 Station Functionality
  • 6.3. The Virtual Layer - Mechatronics Concept Designer
  • 6.4. The Physical Layer – PLC Program
  • 6.5. Controlling the MCD Application using the PLC Program
• 7. Preparation: Station IMS5
  • 7.1. Goal
  • 7.2. Task
• 8. Station IMS5: Practical Assignment
  • 8.1. Goal
  • 8.2. IMS5 Station Functionality
  • 8.3. The Virtual Layer - Mechatronics Concept Designer
  • 8.4. The Physical Layer – PLC Program
  • 8.5. Controlling the MCD Application using the PLC Program
• 9. Preparation: Station IMS7
  • 9.1. Goal
  • 9.2. Task
• 10. Station IMS7: Practical Assignment
  • 10.1. Goal
  • 10.2. IMS7 Station Functionality
  • 10.3. The Virtual Layer - Mechatronics Concept Designer
  • 10.4. The Physical Layer – PLC Program
  • 10.5. Controlling the MCD Application using the PLC Program
• 11. Summary
• 12. Troubleshooting
  • 12.1. OPC UA Communication Troubleshooting
  • 12.2. PLCSIM Advanced V2.0 Troubleshooting